> Strona główna > Artykuły
Tłumacz Strony/Translator Site
Kalendarz
Luty 2017
P W Ś C P S N
    1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 21 22 23 24 25 26
27 28
ARTYKUŁY - ARTICLES Ab ovo usque ad mala
Nostradamus
MONDE UNIVERS CRÉATION
Materiały nadesłane
do redakcji portalu
redakcja portalu nie
ponosi odpowiedzialnosci
za nadeslane materiały




Artykuł pilotujący książkę Watykan Zdemaskowany - Papież musi umrzec



Afera Banco Ambrosiano



Koniec ery ryb cz.1-tajemnicza wiedza majów
Koniec ery ryb cz.2- Naukowcy dowodza

 

Pedofilia i Satanizm... cz1     
Pedofilia i Satanizm...cz2
  
 


NOSTRADAMUS VATINICIA CODE 





NOSTRADAMUS VATINICIA CODE [ ENG ]



Chrońmy nasze dzieci -
Plaga społeczeństwa -
Pedofilia


Prof. Adam Gierek: Słońce zniszczy Ziemię!
 
 

Ks. Piotr Natanek oskarża Watykan




Afery za Spiżową bramą

 
THE STRUCTURE OF THE ATLANTEANS IN RENNES LES BAINS
Data 17/05/2011 07:57  Autor Magdalena and Andrzej Struski   Kliknięć 2204  Język Global
 

THE STRUCTURE OF THE ATLANTEANS IN RENNES LES BAINS

 

 

 

THE MYSTERIOUS ROCK STRUCTURE IN RENNES LES BAINS

 

THE ROCK WALL THIRTEEN METERS LONG IN RENNES LES BAINS IS THE PROOF THAT THOUSANDS OF YEARS AGO A HIGHLY TECHNOLOGICALLY DEVELOPED CIVILISATION EXISTED HERE.

 

 

THE ROCK 13m LONG AND 8m HIGH WITH SIDE LEDGES, EACH ONE 4m LONG, WAS EXPOSED TO SURFACE MECHANICAL WORKING. WHOLE ITS SURFACE WAS SCRAPED  BY MEANS OF A MULTI-ROW HEAD FOR THE WORKING OF THE STONE. MILLING WAS DONE WHEN OUR CIVILISATION HAD NOT YET HAD SUCH TECHNICAL MACHINES.

 

 

In Rennes les Bains there is a rock incision  which in its size corresponds to the size of a one-storey house that was made many thousands years ago by a civilisation that ceased to exist a long time ago. The proof of such a conclusion is the work of a technical device visible on the surface of this rock the aim of which was to scrape  the outer layer of the stone. A few centimeters  thick surface of this rock was torn off by means of a machine with a multi-row cutting head .

 

Photo 1 The picture of a rock wall, milled by the cutting head.

 

 

Photo 2 A visible end of the area subjected to milling.

 

 

The end of the area subjected to milling that is visible in the bottom part of the photo is situated at the height of about one meter and a half from the bottom base of the rock. The surface was  being removed  on the whole length of the 13m rock wall and on the side slant ledges. The height of the surface that was milled was 7m and it was done in a very precise way, even the surfaces of the walls in the corners were scraped very precisely.

 

For the working of this rock there was probably used a head that had seven or eight rows of cutting blades. Such a conclusion arises from the visible stripes which have a similar width and number of rows which the cutting discs can leave. Also characteristic hollows are visible here which come into being when the head meets during its work a harder rock.

 

The horizontal rows of visible hollows occur in the places where there are natural geological divisions of rock layers. Each such layer has individual physical features including hardness. The head when it meets the rock which has a bigger hardness essentially had to deflect from the previous line of work, at the same time it had to create a characteristic hollow.

 

 

 

Photo 3 The picture of the rock wall.

 

There would be no problem were it not for the fact that this structure has existed for many centuries or millennia. I think that these are rather the millennia as even fifty centuries ago our civilisation did not have such machines. I used here the time indication which compares these structures with the time of the activities of the Egyptians during the cosmetic treatment on  the pyramids that had already existed there. The term “during the cosmetic treatment on the pyramids that had already existed there ”  is justified in my opinion and an adequate explanation of it I justified in the article that refers to the time of the construction of the Sphinx and Pyramids in Giza.

 

 

While referring the subject of the Pyramids to the matter of the rock from Rennes les Bains I refer to the time when there existed technical possibilities of the use of  machines for the  working of   the stone by a man. The blocks of rock which were used to cover the structures of the Pyramids that already existed at that time were only cut, there is a lack there of the indications of the use of  milling heads. The reference to the Pyramids has yet a different aspect which takes us to the time of the existence of the civilisation which has a technology that is similar to the technology which our civilisation has today.

 

The surface of Chefren's Pyramid that is visible under the layers of the blocks that were put by the Egyptians has regularly cut blocks. One may assume that the technology that was at the disposal of the constructors of the pyramids was much more advanced than the technology of Egypt 50 centuries ago.

 

In conclusion to such an assumption one may accept a theory that the rock in Rennes les Bains was also worked  at the time when the Pyramids in Giza came into being. Thus, it was at the time when there existed on earth a different highly developed civilisation that preceded our civilisation. It is difficult to define a precise time of the existence of this civilisation without carrying out specific research.

 

 

 

The photographic documentation presented below proves that this rock was worked at the time when before it there was no layer of clay terrain two meters thick on which today the trees are growing. This clay is the effect of the erosion of rocks that in the past were situated above the rock that was worked. About one meter of the height of the milled area is now under the layer of clay and this area of the rock preserved the best physical state of the visible hollows.

 

What is left to be still explained is the issue of the use of this specific structure. It is situated on    the eastern slope, consequently it indicates one of the options of the use in the form of a huge mirror the task of which was to direct the light of the rising sun to the opposite northern slopes. There are still other aspects which reinforce the theory of the mirror.

 

1/ The area of the milled surface embraces the whole surface of the wall, from one corner to the next, as well as the whole surfaces of the side walls with the exception of a one meter and a half high strip at the base of the wall. The proof of it is the fact that even the corners were very carefully scraped . It is the proof of the fact that there also were the elements that should have been removed.

 

2/ However the fact that the surface of the bottom strip of the wall was not milled is the proof that there was nothing that ought to be removed there.

 

 

Photo 4 A visible convex shape of the wall.

 

3/ A convex construction of the wall.

 

 

4/ Slant rock ledges are set at a different angle to the wall.

 

In conclusion to these issues one may exclude the use of the rock wall as the carrier for the cultic symbols. In this case the wall would not be convex and the side ledges would be set at the same level.

 

 

The indication of its use as the place that served for installing the mirror is the lack of the signs of milling in the area below one meter and a half from the bottom of the wall. The mirror in the bottom strip of the wall  would reflect the rays of the sun too low and consequently the reflected light would fall on the terrain obstacles.

 

 

 

The next thing which indicates that it is the mirror are the angles of the side walls. The southern wall stands at the right angle to the axis of the rock wall and the northern wall stands at the obtuse angle. Such a different positions of side walls are justifiable only if the walls are to serve as the side mirrors. The southern wall loses the access to the rays reflected from the main wall 

quicker than the northern wall.

 

The most basic proof of the fact that  the rock structure was designed for installing a gigantic  mirror is the convex shape of the rock wall. Such a convex shape allows to receive the sun's rays for a few hours at the angle that approximates the optimal one. The convex shape allows also to send the reflected light to the wide distance of the northern slope of the valley of Rennes les Bains.

 

However, the matter of the  liquidation of the mirror which must have been a beneficial factor in the life of the valley is very strange. One may accept an assumption that in the picture of the mirror itself there were motifs that brought in some cultic discrepancies  in relation to the principles of social culture of the civilisation that liquidated the surface of this wall.

 

 

 

© MAS Magdalena and Andrzej Struski de Merowing.

 

The text above is the text of the author.

Copying, distribution only by the permission of the author of the text and giving a link to the official site of the authors.

France-Languedoc-Roussillion,Boudet,Rennes les Bains,rennes les Chateau,Cromleck,celtique.